woven crop top
June 25, 2011 § 7 Comments
Here’s a DIY-fashion kickoff to the first weekend of summer! Now, if I may say, the last time crop tops were this explosive was in 1991, twenty years ago. Yes, I have full recollection, considering I was already in sixth grade. Now, if I must add (if you can add the numbers) — I really couldn’t, wouldn’t, shouldn’t wear a crop top now at my age. Or…not at least without layering a tank underneath? I do not have the guts to wear the top alone, the irony of which is needless to say, my gut itself.
I’m sure you’re catching on, I am really loving the basket weave. I baked that gigantic basket-weave cornucopia cracker, crafted those eco basket-weave vases from milk and juice cartons, so why not basket-weave my clothes, too?
For this project, you will need two identical t-shirts, a rotary blade and cutting mat, or fabric scissors. Conveniently, when I started planning to make this tee two weeks ago, Michaels had their shirts on sale, 2 for $6.
1. On one shirt, cut a boat neck.
2. On the same shirt, trim the sleeves to your preference.
3. On the same shirt, cut equal vertical strips (I did 3/4″) from the left of center, starting from the bust all the way to the bottom of the shirt. Make sure there is a centered strip. When you get to the end, trim off the last strip — this will provide the horizontal gaps on the sides.
4. Repeat from right of center, until your entire shirt has vertical strips across. Trim off the last strip, as above.
5. Take your second shirt, cut equal horizontal strips from the bust all the way to the bottom of the shirt.
6. Start weaving. The easiest way is to fold back alternating vertical strips on the front and back of the shirt, then sliding one horizontal strip through.
7. Take your folded strips and bring on top of the horizontal strip, on the front and back.
8. Repeat the weaving by folding back alternating vertical strips on the front and back of the shirt, then sliding one horizontal strip through. Take your folded strips and bring on top of the horizontal strip, on the front and back.
9. Continue weaving until you have used all of your horizontal strips.
10. Tug on each strip to stretch it out.
11. Knot each vertical strip to the last horizontal strip. You can play with the distances of the vertical strips to create various gaps. I knotted about half of vertical strips close to center to be as close as possible to each other. Then I knotted the remaining strips on the side at about 1″ apart. Patterns can differ greatly from where these knots are tied.
Now wear it and bare it!!